Before you begin, please ensure your firmware is version 126.96.36.1997 or above otherwise the PPPoE information will not be persisted.
First, you must login to the GL-iNet B1300 WebUI at https://192.168.11.1 with the password located on the back of the device labeled "root/xxxxxx". DO NOT type in "root/" only everything after as the password will be incorrect.
Once you are in the WebUI, click Network and then Interfaces.
Then, click Add interface.
3. Change the protocol from "Static" to "PPPoE" give it a name (*required ).
Now your all set! Put in the PPPoE credentials you would like and make sure you click SAVE & APPLY.
If you need help, or have suggestions on how to make our documentation better, please email email@example.com.